Students of assistance. If you have read about Chip Bergh already – you may have come to the same conclusion. Useful tips for writing a diploma and a course on the subject "Industrial and civil construction," Let's start with the first sheet of the diploma that is a sheet of A1 on architecture. On the general plan must Draw a red line, it is a point of reporting all size lines. But it is better to draw a coordinate system for public buildings, a distance of 50 meters. Then make up a sign with a list of buildings and indicate your coordinates only projected building. All sized mark on building facades should be located at the side of the drawing. Filling the list should be about 70%.
but mostly it depends on the teacher. On windows of the facade must be the symbol for example HC1. On the first page to be improper collection or sections. Clearly acquainted with all the above told you at the first sheet of Architecture You can also get acquainted with explanatory memorandum of this diploma. In calculating the foundation I advise you to count them using such a foundation 13, monomials, lira. Calculation using the much faster and more efficiently than by hand. Me It took more than a month to calculate the foundation by hand and just then something had to enter into the program permanent and temporary loads. On the calculation of the central monolith loaded w / w columnar foundations under columns the manual option, you can find by clicking on the above link to the site and found the example in the diplomas.
Since section TOSP very large, and it concerns a lot of nuances that are not to discuss in one article. I can you advise only one thing to read carefully this section. And if you will that is unclear or have any questions write in comments about the article. And in the next article I will answer all your questions. Acquainted with Section TOSP you by clicking on the link section on TOSP As the economy section that there needs knowledge of the program AVC. But you can see how it looks like all the stuff on the economy section by clicking on the above links to the site. Unfortunately, most estimates yet but soon will. Well, line of work and I give you a cliche in this section. You simply substitute what your numbers into the formulas and all. Foreign exchange on 'Calculation of plates overlap and cover the 'magician only to help put it on the site Mercator example can be found by clicking on the link course on' The calculation of floor slabs and coatings' Hope this helps.
No comments